Frameless Shower Door OptionsPrincipal frameless glass shower doors are depicted below : Glass All glass used in frameless shower door assemblies should be approved 8mm or 10mm toughened float safety glass to NZS 4223. Finishes Standard : | Polished chrome White powercoat 24K gold | Special : | Satin chrome Black chrome powercoat colours |
Hinge Types ES1 wall mounted ES2 glass mounted ES2 glass mounted at 135' angle Handle Types 250 x 25mm diameter double D vertical.. 300 x 25mm diameter, single D pull handle horizontal. 25mm diameter double pull knob. Channel 18mm x 18mm x 1.8mm wall thickness. All glass is siliconed into channel. Waterseal An aluminim section with nylon insert available as an extra. Detailed information regarding door/panel maximum sizes, clearances, watersealing, installation and design is available on request. | | Hinges High quality, percision made from solid brass. The hinges incorporate a unique spring tensioning system. This allows the hinge to open both in and out, and gives the door a positive return to the closed position from approximately 30' (dependent on the door size). | Channel The channel is screwed and silicone sealed to the wall and base to support free standing door panels. If the shower door is hinged from a glass panel and the shower enclosure requires top support for rigidity. A small toughened overlight glass panel can be siliconed to the door head as a brace. Dimensions : 18mm x 18mm x 1.8mm Finishes : Polished bright silver or gold anodised and powercoat colours. | Waterseal The waterseal is an optional extra which is silicone glued to the bottom inside edge of the door. It has the dual purpose of shedding water away from the door and preventing splashing under it. The waterseal is an aluminium section incorporating a nylon brush insert and is available in the same finishes as the channel. |
|  |  Silicone on both sides of glass |  3mm minimum inwards fall is desirable on tiled threshold |
|
